Tuesday’s Tutorial: New Brown Plant Hanger

Time To Bring The Plants In.

Image Hosting by PictureTrail.com

Don’t know about you. But in my area, survival of ANY plant meant it needed to come inside. WEEKS ago!!

Here’s a little something perfect for them to hang in.


Supplies/Tools Needed to Make Brown Plant Hanger

  • 65 yards macrame cord (5-6mm braided or twisted, your choice)
  • Two 4″ welded metal rings (preferably treated, not raw metal)
  • One 2″ welded metal ring (preferable treated, not raw metal)
  • 8 medium size beads (large hole opening)
  • 8 large beads (large hole opening)
  • “S” hook or something to extend plant hanger from
  • yardstick/ruler/measuring tape
  • scissors

Directions to Make Brown Plant Hanger

Step 1.

Cut 16 cords 4 yards long.  Cut one cord 1 yard long (for top wrap knot).

Step 2.

Find centers of all 4 yard cords and loop them through the 2″ welded ring.  Hold them tight in your hand and using the 1 yard cord, tie a 1″ Wrap Knot.

Step 3.

Divide cords into 8 groups of 4 cords each. Begin tying Square Knots (SK) with one group. Tie a Sinnet of 6 SK’s. Continue with the rest of the groupings.

Step 4.

Half Hitch (HH) all cords to one of the 4″ welded rings.

Step 5 – Adding Medium Size Beads.

Tie a 2 SK Sinnet with each cord grouping. (Stay with the same cord groupings as created in Step 3.)  Add one medium size bead to all 4 cords in that group. Tie ANOTHER 2 SK Sinnet with the SAME group you just added the bead to. Continue with this process for the rest of the groupings.

Image Hosting by PictureTrail.com

Step 6 – Tying Half Knot Sinnet.

Drop down 1 3/4″ and tie a Half Knot (HK) Sinnet of 18 HK’s with one group of 4 cords.  (Stay with the same cord groupings as created in Step 3.)  Your cord will start to twist. That’s OK. It is supposed to do that. Continue with the rest of the groupings.

Step 7 – Adding Large Beads.

Add one large bead to all 4 cords in each group. IMPORTANT: Switch tying cords. Your longer middle filler cords will now become the outside tying cords.  This saves on macrame cord. Otherwise you would have to cut longer cords.

Image Hosting by PictureTrail.com

Step 8.

Tie a Half Knot (HK) Sinnet of 18 HK’s with each group.  (Stay with the same cord groupings as created in Step 3.)

Step 9 – Forming the Cradle.

Drop down 4″. Tie ONE ROW of Alternating Square Knots (ASK).

Image Hosting by PictureTrail.com

This just means you will tie knots with 2 cords from one grouping and 2 cords from the next grouping. (Not all cords from the same group.) Go all around the entire plant hanger. You should have 8 knots.

Drop down 3″. Tie one row of ASK’s but with 2 SK Sinnet. Continue around. You should end up with 8 groups of 2 knots each.

Image Hosting by PictureTrail.com

Step 10 – Finishing.

Drop down 2″. Half Hitch (HH) all cords to the last 4″ welded ring.

Image Hosting by PictureTrail.com

Trim cord ends as desired. Cut evenly across or stagger ends, your choice.  Tie an Overhand Knot in each cord end OR melt the tips to prevent from unraveling. Touch cord lightly to melt. Do not burn or scorch the cord.

Image Hosting by PictureTrail.com

All done!! Congrats. Plant hanger measures 40″.

Image Hosting by PictureTrail.com


I am assuming you already have some knowledge of how to tie knots.

You need to know how to tie the following basic knots:

  • Step 2.  Wrap Knot
  • Step 3.  Square Knot and SK Sinnet
  • Step 4.  Half Hitch
  • Step 6.  Half Knot and HK Sinnet
  • Step 9.  Alternating Square Knot

Need Some Help Tying Macrame Knots?

These illustrations will provide assistance with basic macrame knot tying.

Lark’s Head (LH) and Reverse Lark’s Head (RLH): Fold each length of cord in half. Fold the loop down over the cords toward you.

Image Hosting by PictureTrail.com

Image Hosting by PictureTrail.com

Image Hosting by PictureTrail.com


Square Knot (SK):  To tie a square knot, you will need preferably four (4) cords, though three will work. But normally you will tie a SK with 4 cords, two knotting and two filler.

For this knot, the two outside cords are called the knotting cords or tying cords. The two center cords are called filler cords. Sometimes called holding cords.

A Square Knot (SK) is tied in two steps.

Step 1: Following the illustration, take the outside right hand cord and place it under the two center cords, and over the left knotting cord. Hold in place. Take the outside left-hand knotting cord and place it under the right-hand knotting cord. Holding the right-hand knotting cord in place, bring the left-hand knotting cord up over the two center cords and through the space between the right-hand center cord and the right-hand knotting cord. Take hold of the two outside cords and pull snugly into place.

Step 2: The second step is just the reverse of the first step. Take the right-hand knotting cord, place it over the two center cords and under the left knotting cord. Hold in place. Take the left-hand knotting cord and place it over the right-hand knotting cord, under and behind the center cords, and up through the space between the right-hand center cord and the right-hand knotting cord. Taking hold of the two outside knotting cords, pull snugly into place to form your Square Knot.

Image Hosting by PictureTrail.com

Image Hosting by PictureTrail.com

Image Hosting by PictureTrail.com

Image Hosting by PictureTrail.com


Half Knot (HK): Step 1 of the square knot or Step 2 of the square knot by itself is called a half knot. When one of these steps of sequences is repeated several times, the knot begins to twist.

Image Hosting by PictureTrail.com


Square Knot Sinnet and Half Knot Sinnet: A sinnet is a chain that is formed when knots are tied repeatedly along a filler cord.  A sinnet of square knots makes a flat solid braid. A sinnet of half knots creates a spiraling effect.

Image Hosting by PictureTrail.com

Image Hosting by PictureTrail.com

Practice, practice, practice.

How to Macrame a Plant Hanger

Image Hosting by PictureTrail.com

FINISHED LENGTH: approx 4 1/2 ft, from top of ring to bottom tail.  Will hold up to a 9″ diameter basket, container or bowl.

MATERIALS USED:

Image Hosting by PictureTrail.com

  • 50 yards gray 6mm braided macrame cord
  • 1 –  2″ welded ring (treated, not raw metal)
  • 4 large hole gray marbella beads
  • 16 smaller gray marbella beads for tail cords

You can find these materials for wallet-friendly prices if you click here!


DIRECTIONS

Step 1: Cut 8 cords 6 yards each and 2 cords 1 yard each.

Step 2: Use a 1 yard cord to completely cover the 2″ welded ring with continuous Larkshead Knots (or half hitches).

Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com

Step 3: Fold the 6 yard cords in half through the covered ring and use a 1 yard cord to tie a 1 1/2″ Wrap Knot over all cords, hiding the ends from Step 2. (I use a push tool to hide the cut cord ends after tying the wrap knot. See photo.)

Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com

Step 4: Divide the cords into 4 groups of 4 cords each and tie 2″ of Crown Knots. Pull each cord tight and smooth. (Tip: Put your work between your knees.) Go here for additional instructions on how to make crown knots. https://thisyearsdozen.wordpress.com/2009/05/27/how-to-tie-a-crown-knot/

Image Hosting by PictureTrail.com

Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com

Step 5: Using the same groups of 4 cords, complete the following with each group:

  • Tie 9″ of square knots.
  • Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com

  • Tie 3″ of half knot twists.
  • Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com

  • Add a large hole bead over ALL cords in each group of 4 cords. Tie 3″ of half knot twists, using the 2 longest cords as tie cords.
  • Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com

  • Tie 5″ of square knots.

Image Hosting by PictureTrail.com

Step 6: Drop down 4″ and connect all sinnets with a row of alternating square knots.

Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com

Step 7: Drop down 3 1/2″ and tie 2 rows of alternating square knots. Use the 2 longest cords to tie 1 square knot over all cords. (Note: I ended mine with a wrap knot since I had extra cord. If you purchased just 50 yards, you won’t.)

Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com

Step 8: Add one smaller bead to each cord end. Tie an overhand knot in each cord and trim all cords just below the overhand knot.

Image Hosting by PictureTrail.com

Finish off: Burn cord ends slightly to keep cord from fraying. Hold fire to cord a nanosecond to melt cord, not scorch it.

Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com

Enjoy!!


If you would like a longer macrame plant hanger with more detail, go here for the pattern. Thanks!!

http://www.etsy.com/listing/69800943/pattern-for-macrame-plant-hanger