Tuesday’s Tutorial: New Brown Plant Hanger

Time To Bring The Plants In.

Image Hosting by PictureTrail.com

Don’t know about you. But in my area, survival of ANY plant meant it needed to come inside. WEEKS ago!!

Here’s a little something perfect for them to hang in.


Supplies/Tools Needed to Make Brown Plant Hanger

  • 65 yards macrame cord (5-6mm braided or twisted, your choice)
  • Two 4″ welded metal rings (preferably treated, not raw metal)
  • One 2″ welded metal ring (preferable treated, not raw metal)
  • 8 medium size beads (large hole opening)
  • 8 large beads (large hole opening)
  • “S” hook or something to extend plant hanger from
  • yardstick/ruler/measuring tape
  • scissors

Directions to Make Brown Plant Hanger

Step 1.

Cut 16 cords 4 yards long.  Cut one cord 1 yard long (for top wrap knot).

Step 2.

Find centers of all 4 yard cords and loop them through the 2″ welded ring.  Hold them tight in your hand and using the 1 yard cord, tie a 1″ Wrap Knot.

Step 3.

Divide cords into 8 groups of 4 cords each. Begin tying Square Knots (SK) with one group. Tie a Sinnet of 6 SK’s. Continue with the rest of the groupings.

Step 4.

Half Hitch (HH) all cords to one of the 4″ welded rings.

Step 5 – Adding Medium Size Beads.

Tie a 2 SK Sinnet with each cord grouping. (Stay with the same cord groupings as created in Step 3.)  Add one medium size bead to all 4 cords in that group. Tie ANOTHER 2 SK Sinnet with the SAME group you just added the bead to. Continue with this process for the rest of the groupings.

Image Hosting by PictureTrail.com

Step 6 – Tying Half Knot Sinnet.

Drop down 1 3/4″ and tie a Half Knot (HK) Sinnet of 18 HK’s with one group of 4 cords.  (Stay with the same cord groupings as created in Step 3.)  Your cord will start to twist. That’s OK. It is supposed to do that. Continue with the rest of the groupings.

Step 7 – Adding Large Beads.

Add one large bead to all 4 cords in each group. IMPORTANT: Switch tying cords. Your longer middle filler cords will now become the outside tying cords.  This saves on macrame cord. Otherwise you would have to cut longer cords.

Image Hosting by PictureTrail.com

Step 8.

Tie a Half Knot (HK) Sinnet of 18 HK’s with each group.  (Stay with the same cord groupings as created in Step 3.)

Step 9 – Forming the Cradle.

Drop down 4″. Tie ONE ROW of Alternating Square Knots (ASK).

Image Hosting by PictureTrail.com

This just means you will tie knots with 2 cords from one grouping and 2 cords from the next grouping. (Not all cords from the same group.) Go all around the entire plant hanger. You should have 8 knots.

Drop down 3″. Tie one row of ASK’s but with 2 SK Sinnet. Continue around. You should end up with 8 groups of 2 knots each.

Image Hosting by PictureTrail.com

Step 10 – Finishing.

Drop down 2″. Half Hitch (HH) all cords to the last 4″ welded ring.

Image Hosting by PictureTrail.com

Trim cord ends as desired. Cut evenly across or stagger ends, your choice.  Tie an Overhand Knot in each cord end OR melt the tips to prevent from unraveling. Touch cord lightly to melt. Do not burn or scorch the cord.

Image Hosting by PictureTrail.com

All done!! Congrats. Plant hanger measures 40″.

Image Hosting by PictureTrail.com


I am assuming you already have some knowledge of how to tie knots.

You need to know how to tie the following basic knots:

  • Step 2.  Wrap Knot
  • Step 3.  Square Knot and SK Sinnet
  • Step 4.  Half Hitch
  • Step 6.  Half Knot and HK Sinnet
  • Step 9.  Alternating Square Knot

Tuesday’s Tutorial: Bronze Macrame Belt

Today’s tutorial will be a macrame belt. Bronze Ringer.

Image Hosting by PictureTrail.com

Supplies/Tools Needed:

  • 3 1/2 mm braided macrame cord (51-61 yards*)
  • one 2 1/4″ welded ring (treated not raw metal)
  • macrame board or covered ceiling tile
  • T-pins
  • tape measure, ruler or yardstick
  • scissors

Directions to make belt.

Step 1.  Cut twelve 5 yard cords and one 1 yard cord.

Step 2.  Using the one yard cord, cover 2 1/4″ ring with continuous half hitches. Trim the excess cord when finished.

Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com

Step 3.  Find the centers of six 5 yard cords and mount to one side of the covered ring using Reverse Lark’s Head knots.  (Set the other six 5 yards cords aside for later.)

Image Hosting by PictureTrail.com

Step 4.  Number cords 1-12.

Row 1. Tie Square Knots (SK) with cords 1-4, 5-8 and 9-12.  (Unless noted otherwise, you will always tie a square knot with 2 filler cords. )  Tie the knots close to the ring.

Image Hosting by PictureTrail.com

Row 2. Tie SK’s with cords 3-6 and 7-10.

Image Hosting by PictureTrail.com

Row 3. Tie a SK Sinnet of 3 SK’s with cords 1-4, 5-8 and 9-12. A sinnet is a vertical row of knots, one tied right under the next.

Image Hosting by PictureTrail.com

Row 4. Tie SK’s with cords 3-6 and 7-10.
Row 5. Tie SK’s with cords 1-4, 5-8 and 9-12.
Row 6. Tie SK’s with cords 3-6 and 7-10.

Image Hosting by PictureTrail.com

Repeat Rows 3 through 6 seven times.

Image Hosting by PictureTrail.com

Step 5. To finish off this side of the belt…

Tie a SK Sinnet of 3 SK’s with cords 1-4, 5-8 and 9-12.
Tie 3 large square knots using the two outer end cords on both sides as tying cords and the 8 cords in the middle as filler cords.

Image Hosting by PictureTrail.com

Step 6. The Tail. Determine how long you wish the tail to be and trim cords to that length. Tie an overhand knot at the end of each cord. Cut cord close to the overhand knot. Using a match or lighter, melt cord lightly to keep from fraying. Don’t hold fire too long to the cord. You don’t want to burn it.

Image Hosting by PictureTrail.com

Step 7. Repeat Steps 3 through 6 for the opposite side of the belt.

Image Hosting by PictureTrail.com

Congratulations!! You are done and ready to wear your belt. You can insert whatever you wish inside the ring opening, such as the wooden flower, as I did. Or leave the opening plain. This belt is pretty tied to the side or tied with the ring in the front.

Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com


* Note: Length of cord to use depends on your waist size and how long you want belt to be. This belt in the tutorial measures 41″ at the point it ties around the waist. The tails measures 17″. So cut shorter cords if you want a smaller belt and eliminate a few of the “repeat” sections in Step 4.

How To Macrame a Lid Cover

After making a pretty macrame container, you may wish to cover it with a matching lid. I will show you how to make a simple one. It is fast to make and only has 11 rows of Square Knots.

Image Hosting by PictureTrail.com
Free Image Hosting at www.picturetrail.com Free Image Hosting at www.picturetrail.com Free Image Hosting at www.picturetrail.com Free Image Hosting at www.picturetrail.com

Supplies/Tools Needed:

  • 12 yards macrame cord (I used 6mm braided)
  • One 5″ welded metal ring (preferably treated metal not raw)
  • Tape measure/ruler/yardstick
  • Scissors
  • Craft glue
  • T-pins
  • Macrame board or covered ceiling tile
  • Accessories such as buttons or beads, as desired

STEPS TO MAKE 5″ ROUND MACRAME LID

Step 1. Measure and cut 6 cords 46″ long. Cut 2 cords 50″ long. The longer cords will be on the sides.

Step 2. Take one of the 50″ cords, measure down 28″ and attach to board with the LONGER side of the cord on the left. Find the center of the six shorter cords and attach with T-pins to macrame board. Take the 2nd 50″ cord, measure down 28″ and attach to board with the LONGER side of the cord on the right.

Image Hosting by PictureTrail.com

You should have pinned to the macrame board 8 cords in the following order: 50″, 46″, 46″, 46″, 46″, 46″, 46″, 50″

Step 3. Mount cords to the TOP of 5″ ring using Reverse Lark’s Head knots (RLH) and one Half Hitch (HH). Per cord.

Image Hosting by PictureTrail.com

When all cords have been mounted to the ring, they should look like this.
Front
Image Hosting by PictureTrail.com

Back
Image Hosting by PictureTrail.com

Step 4. Number cords from 1-16.

Step 5. Begin tying a row of Square Knots (SK).
Row 1: 4 SK’s with cords 1-4, 5-8, 9-12, 13-16
Row 2: 3 SK’s with cords 3-6, 7-10, 11-14

Image Hosting by PictureTrail.com

Step 6: Wrap cord #1 around the ring on the LEFT side of the ring with a DOUBLE HALF HITCH. (Photo is showing once. Do this twice.) Repeat for cord #16, on the RIGHT side of the ring, when you get to it, but BEFORE you tie that knot.

Image Hosting by PictureTrail.com

Row 3: 4 SK’s with cords 1-4, 5-8, 9-12, 13-16
Row 4: 3 SK’s with cords 3-6, 7-10, 11-14

Image Hosting by PictureTrail.com

Step 7.
Rows 5-9: Continue repeating Step 6 until you reach Row 9 which has 4 SK’s. (Picture is showing up to Row 7)

Image Hosting by PictureTrail.com

Step 8. Almost done. Two more rows to tie.
Row 10: Tie 3 SK’s with cords 3-6, 7-10, 11-14
Row 11: Tie 2 SK’s with cords 5-8 and 9-12

Image Hosting by PictureTrail.com

Step 9. Take all cords and push behind the ring. You will now begin to Double Half Hitch (DHH) all cords to the bottom of the ring.

Image Hosting by PictureTrail.com
Image Hosting by PictureTrail.com

This is how the back looks after all cords have been double half hitched to bottom of the ring.

Image Hosting by PictureTrail.com

Here is front view.

Image Hosting by PictureTrail.com

Step 10. Pull cords tight against the ring. Apply craft glue to the DHH’d cords. Allow to dry overnight. Cut cords close to the ring. Burn cords ends with matches or cigarette lighter to melt cords end to keep from fraying. Don’t burn. Touch cord lightly.

Congratulations!! You have just created a macrame lid.

Finishing Touches. You can add a backing if desired as I have done using felt. Cut a circle to fit almost to the end of the lid. Hand sew to attach. If you are adding beads or buttons, do so before sewing on the felt backing.

Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com

Different Size Lids. You can make a lid in any size. Adjust amount of cord needed to accommodate ring size. And remember to allow a bit longer for the side tying cords.

Enjoy!!


If you need help making knots, go here.

https://thisyearsdozen.wordpress.com/2009/06/23/macrame-knots/

https://thisyearsdozen.wordpress.com/2008/05/06/how-to-tie-a-macrame-square-knot/

https://thisyearsdozen.wordpress.com/2008/05/14/how-to-macrame-a-belt/


Here are a few of my macrame projects I made lids for.
Free Image Hosting at www.picturetrail.com Free Image Hosting at www.picturetrail.com Free Image Hosting at www.picturetrail.com Free Image Hosting at www.picturetrail.com Free Image Hosting at www.picturetrail.com Free Image Hosting at www.picturetrail.com Free Image Hosting at www.picturetrail.com Free Image Hosting at www.picturetrail.com Free Image Hosting at www.picturetrail.com Free Image Hosting at www.picturetrail.com Free Image Hosting at www.picturetrail.com Free Image Hosting at www.picturetrail.com