How To Make Flat Spiral Stitch Earrings

Image Hosting by PictureTrail.com

Here’s an easy project for you. I made the complete set. Necklace, bracelet and earrings.

To get you started… You can make just the earrings.


Supplies Needed To Make One Pair of Flat Spiral Stitch Earrings

Image Hosting by PictureTrail.com

  • 11/0 seed beads (black, red, white)
  • 4mm black bicone crystals (6 per earring)
  • black round glass beads (5 per earring)
  • pair of ear wires
  • 3mm CLOSED jumprings (2)
  • Fireline beading thread
  • beading needle size 10 or 12

Step 1

Cut 1 1/2 yards of Fireline, leaving a 7″ tail. Add a bead stopper. Pick up two (2) round black beads. Drop beads down to the bead stopper.

Image Hosting by PictureTrail.com

Step 2

Pick up 6 black seed beads, one 4mm black bicone, 6 red seed beads. Drop these down on top of the two black round beads added in Step 1.

Image Hosting by PictureTrail.com

Take thread up through the 2 black round beads. Thread should exit the top one.

Image Hosting by PictureTrail.com

Pull tight. This creates the “black/red arch”, working bottom up. Push arch to the left.

Image Hosting by PictureTrail.com

Step 3

Pick up 6 black seed beads, one 4mm black bicone, 6 white seed beads. Drop these down on top of the black round beads. Take needle up through the two black round beads. Exit the top one.

Image Hosting by PictureTrail.com

This completes one complete arch. Black/red on the left. Black/white on the right.

Image Hosting by PictureTrail.com

Step 4

Add one black round bead. Slide it down to rest on top of your beadwork.

Image Hosting by PictureTrail.com

Step 5

Pick up 6 black seed beads, one 4mm black bicone, 6 red seed beads. Drop these beads down on top of the black round bead you added in Step 4. Take needle up through the 2nd from bottom round black bead PLUS the one just added.

Image Hosting by PictureTrail.com

Pull tight. Push “black/red arch” to the left. Thread should exit the top black round bead.

Image Hosting by PictureTrail.com

Step 6

Pick up 6 black seed beads, one 4mm black bicone, 6 white seed beads. Repeat the same steps as used for the black/red arch.

Image Hosting by PictureTrail.com

Now you should have two complete arches done.

Image Hosting by PictureTrail.com

Step 7

Repeat Steps 4, 5 and 6 once more to add the 3rd complete arch. Start by adding one black round bead. Slide down.

Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com


That completes the arches. Your beadwork should now look like this. Make sure the black/red is on the left and black/white is on the right. Pull tight.

Image Hosting by PictureTrail.com

OK, now ready for the last step.

Step 8

Pick up two (2) black seed beads, one black round bead, one black seed bead, one 3mm CLOSED jumpring. Drop down.

Image Hosting by PictureTrail.com

In reverse order. Go around the closed jump ring. And down through seed bead, round black bead, two seed beads. Continue down through the center of ALL black round beads. Exit bottom round bead.

Image Hosting by PictureTrail.com

Make your way back up the center of the black round beads. Back up to the top to loop around the closed jump ring. To secure it. Do this a couple times. Pull thread tight. Do the same with the tail thread. Bury it up the center. Cut thread. Add ear wire.

And done!! Now create the 2nd earring.

Image Hosting by PictureTrail.com

Enjoy!!


Here’s the necklace and bracelet.

Image Hosting by PictureTrail.com

Image Hosting by PictureTrail.com

Never Too Early For Holiday Crafting

I’ve already started making Christmas stuff for my winter craft shows.

Two more flat spiral stitch bracelets finished.

Image Hosting by PictureTrail.com

Black, black diamond (smokey gray), clear and red Swarovski crystals. 6mm and 5mm bicones.

Image Hosting by PictureTrail.com

And matching earrings.

Image Hosting by PictureTrail.com


This one was made with black diamond crystals (smokey gray) as the core beads. 6mm round. Other crystals are 5mm bicones.

Image Hosting by PictureTrail.com

Image Hosting by PictureTrail.com

I think I like solid black for the core beads best. More dramatic. It POPS.

Image Hosting by PictureTrail.com

You can wear the red on the inside or the outside for a different look.

I am going to make a few more of these flat spiral stitch bracelets, maybe a necklace. Then it is on to something different. Triangles!!

Have You Tried The Flat Spiral Stitch Yet?

What are you waiting for!!

It is so addicting.

Image Hosting by PictureTrail.com

For this one, I gathered up my “green” supplies. Light green, mint green, hunter green and olive. Sparkly, shiny and matte. Even though nothing seemed to match, I made it anyway. I know I said yuck a few times. In my head. But kept going.

Image Hosting by PictureTrail.com

Image Hosting by PictureTrail.com


Next I tried pearls for the core beads instead of crystals. I used turquoise and aqua seed beads for the side arches. 5 of turquoise and 5 of aqua. I didn’t notice this until I was finished. The bracelet is reversible. Wear it one day on the turquoise seed bead side. Aqua side the next. An unexpected surprise!!

Image Hosting by PictureTrail.com

Image Hosting by PictureTrail.com

Image Hosting by PictureTrail.com


This next one, I am using brown, burnt orange, olive and light beige.

Image Hosting by PictureTrail.com

I like creating my own beaded toggle bar. It becomes part of the bracelet design and creates a seamless look. Just have to make sure it is thin enough to easily go through the toggle circle. String 14 or 16 seed beads and peyote 4 rows works best for me.

Image Hosting by PictureTrail.com

I love these Swarovski crystal circles. Pricey, but I still love them.

Image Hosting by PictureTrail.com

Image Hosting by PictureTrail.com

Image Hosting by PictureTrail.com


Every once in a while, I dust off my bag of wire. It has the “good stuff” I bought when I took a couple of wire making classes. It also has inexpensive colorful wire. Artistic wire. I would rather work with the cheap stuff and just toss my mistakes. I don’t work with wire enough to get good at it.

So… I guess I will forever make stuff like this.

Image Hosting by PictureTrail.com

Inspired By Crystal To Make This Crystal Bracelet

Inspiration comes from many places. Something you read. Something you saw.

For my new bracelet it was both. Something I read AND saw. At Bead Happily Ever After. Crystal’s blog.¬†She makes really pretty jewelry. She’s the one I told you about with the jewelry giveaways.

Anyway, she posted this blue crystal bracelet on her blog a week or so ago.

Image Hosting by PictureTrail.com

(I stole this image from her blog.)

Isn’t it beautiful!! So sparkly and delicate looking. You want to just look at it all day. Well, I wanted to do more than that!! I wanted to MAKE MY OWN.

So…. off to You Tube. Anything you want to make is on You Tube. Found this video on the Flat Spiral stitch. Demonstrated by one of Auntie’s Beads designers. Easy to follow along. Watched it twice.

http://www.youtube.com/watch?v=oiB_PID3sC4

Gathered up my Swarovski crystal stash. Didn’t have enough of one color so I went with multi-color crystals.

And created these. Bracelet, earrings and ring.


BRACELET

First off. Started with the bracelet. It was easy to make. I ended one side with seed beads to loop around the toggle bar.

Image Hosting by PictureTrail.com

Other side I made a peyote bail to loop around the crystal ring.

Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com

It is so light on my wrist. I could wear it all day. Even though these are crystals, which shout dress up, you could wear this with your favorite jeans. Dress up. Dress down. Goes with anything.

Image Hosting by PictureTrail.com


EARRINGS

OK. I told you the bracelet was easy. Earrings. Not so much. I made them 3 times. And took them apart 3 times. Just wasn’t coming out the way I wanted. First time. 2 crystals dangled under the bottom. You can imagine anything you want here. LOL!! And I wanted the direction of the seed beads to arch UP on both sides. Not down on one and up on the other. Which meant I had to “turn” my work in the middle. Tried it. So-so. Not balanced when I folded the ends up.

Image Hosting by PictureTrail.com

Next day. 3rd try. Still not right. But getting there. Finally on the 4th try I got it to look like I wanted. I ended up NOT adding crystals to two of the beaded arches under the bottom.

Image Hosting by PictureTrail.com


RING

By now I knew to “turn” my work in the middle so arches would match up on both sides. Also knew what to do to create the peyote band from making the bail for the bracelet clasp. So, the ring was easy.

Image Hosting by PictureTrail.com

Image Hosting by PictureTrail.com

I really love the flat spiral stitch. I know. I know. You have heard it all before. I guess there isn’t a beaded stitch out there that I don’t like!! Try it. You may love it too.


Go here to read all about Crystal’s bracelet. Leave a comment while you are there to be entered in her giveaway. Maybe you will win something. Good luck!!

http://beadhappilyeverafter.com/blog/?p=13070