New Books Just Ordered From Amazon

Took over an hour of searching various sites but I think I got the best on-line deal. At Amazon. And using their SuperSaver Free Shipping, I saved $7. Being on a fixed income, every penny kept in my pocket is a bonus.

Here’s what I bought.

Image Hosting by PictureTrail.com

Image Hosting by PictureTrail.com

Image Hosting by PictureTrail.com

Image Hosting by PictureTrail.com

They are due to be shipped the 12th and I should have them a few days after that.

Can’t wait!!

Attention Quilters: Am I Ready?

Image Hosting by PictureTrail.com

As you can see from the above photo, there is no reason why I can’t start making a quilt top. I want to. I really do. I have the supplies I need to get started.

Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com

Plenty of books.

Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com
Well, you ask, what’s stopping me? I guess, my 10 fingers. And the thought of going through life minus a few of them.

I have a confession. I AM AFRAID OF MY ROTARY CUTTER. Cutters, actually, since I have several. Just looking at them makes me break out in a sweat.

Image Hosting by PictureTrail.com

The one still in the packaging, unopened, was THE best, most expensive one I could find. Now I find out from someone who has one, it isn’t. Something about slippage and not cutting through the fabric cleanly. Then what the heck good is it!! I guess the best no longer means anything.

A friend told me about a glove with stainless steel threads. The kind used by fishermen. It may be cumbersome at first but at least I should feel safe. So… once I have one, I’ll get started. 😀

New Books.. New Ideas..

Thursday, July 24

Got my new books in the mail yesterday.

Don’t remember if I told you but Interweave Press recently had a Hurt Book Sale and offered over 100 craft book titles for 50-75% off. I found two on their list that were on MY list. My To-Buy-List. I got them for under $5 bucks each.

I had my fingers crossed that the books would be usable. I was expecting MAYBE a few dog ears, foggy covers or smeared ink… some reason for them to be considered “hurt”.

But surprise, surprise!! No flaws anywhere. Perfect books, at least to my eyes. I am delighted!! I saved $31.

Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com

Go here for information on next year’s Hurt Book Sale. www.hurtbooksale.com


These next two books I got from Michael’s. Used a 40% off coupon for each. Don’t you just hate paying full price for books. Had to go two different days though.

Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com

How To Make Wire Cages For Round Beads

Silly me!! Didn’t know I could make these cages myself.

I have been buying them!!

Image Hosting by PictureTrail.com

Making these wire cages is quite easy. I found the directions in one of my wire making craft books.

Creating Wire and Beaded Jewelry by Linda Jones.

It is turning out to be my most used wireworking resource.

Image Hosting by PictureTrail.com

My tutorial is based on the results from using 20 gauge wire. It is great practice wire and is forgiving in case you need to unbend, straighten and start over. It is also inexpensive. I got 8 yards for $2.50.


Instructions for making ONE Wire Cage to enclose a 12-14 mm round bead.

Step 1. Cut lengths of 14″ wire. One per wire cage.

Step 2. Making the Swirls. Start at the tip on one end and make a small bend with round nose pliers. (See photo at end of tutorial for tools used in this project.) Now switch to either chain nose pliers or flat nose pliers. Either one will be fine for this step.

Slowly start to form a circle by covering the tip loop with chain nose/flat nose pliers, bending the wire as you turn in as perfect a circle as you can. Make the swirl large enough to cover one side of the bead.

Now start on the other end of the wire. Repeat the same steps and make a swirl on the opposite end of the wire. Make sure the swirls look about even with the same number of revolutions. Leave about 2-2 1/2″ of wire between the swirls.

Image Hosting by PictureTrail.com

Step 3. Making the Hook. Using round nose pliers, find the center of the wire with the swirls facing downward. Hold tight and push up one side and then the other. Refer to photo illustration.

Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com

You are making the “hook” that will serve two purposes. It will cover the center open area of the bead, forming a connection to the side swirls. The hook also creates a loop for attaching the stringing material of your choice.

Image Hosting by PictureTrail.com

Step 4. Enclosing the Bead. Fit one side swirl on top of the bead.

Image Hosting by PictureTrail.com

Now fit the other swirl on the opposite side of the bead, like a sandwich. Holding both swirls in place, wrap the hook around the center of the bead.

Image Hosting by PictureTrail.com

Press flat against the bead middle. Mold the wire, straightening as you work. Once you are satisfied with the cage and it covers your bead nicely, you are ready to bend up the tip of the hook to form a hanger.

Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com Image Hosting by PictureTrail.com

Step 5. That’s it!! You are done. Ready to add whatever you wish to hang your beaded wire cage from.


You can make cages smaller or larger by reducing or increasing the number of revolutions. Also experiment with different lengths of wire to see which best covers the bead size you are using.

Wire cages will look pretty on a pendant, bracelet or earrings. The book used jump rings to connect to the turned up hook. Even keychains would be fun to make. Load up with charms and beads. What better way to use up left over beads or beads with a few flaws. Won’t be able to see the flaw inside a wire cage!!

I am thinking you could make wire cages for other bead shapes too. Oblong and squares. By adjusting the design of the wire. Try experimenting to see what you can create. So far I have only made round cages but I plan to try making other shapes.

My beads I am making wire cages for are blue with orange stripes. I am going to work in seed beads in blue and orange somehow. Still working on that part.

Image Hosting by PictureTrail.com


Tools used: Round nose pliers, Chain nose pliers, and plastic covered Flat nose pliers.

Image Hosting by PictureTrail.com