FINISHED LENGTH: approx 4 1/2 ft, from top of ring to bottom tail. Will hold up to a 9″ diameter basket, container or bowl.
MATERIALS USED:
- 50 yards gray 6mm braided macrame cord
- 1 – 2″ welded ring (treated, not raw metal)
- 4 large hole gray marbella beads
- 16 smaller gray marbella beads for tail cords
You can find these materials for wallet-friendly prices if you click here!
DIRECTIONS
Step 1: Cut 8 cords 6 yards each and 2 cords 1 yard each.
Step 2: Use a 1 yard cord to completely cover the 2″ welded ring with continuous Larkshead Knots (or half hitches).
Step 3: Fold the 6 yard cords in half through the covered ring and use a 1 yard cord to tie a 1 1/2″ Wrap Knot over all cords, hiding the ends from Step 2. (I use a push tool to hide the cut cord ends after tying the wrap knot. See photo.)
Step 4: Divide the cords into 4 groups of 4 cords each and tie 2″ of Crown Knots. Pull each cord tight and smooth. (Tip: Put your work between your knees.) Go here for additional instructions on how to make crown knots. https://thisyearsdozen.wordpress.com/2009/05/27/how-to-tie-a-crown-knot/
Step 5: Using the same groups of 4 cords, complete the following with each group:
- Tie 9″ of square knots.
- Tie 3″ of half knot twists.
- Add a large hole bead over ALL cords in each group of 4 cords. Tie 3″ of half knot twists, using the 2 longest cords as tie cords.
- Tie 5″ of square knots.
Step 6: Drop down 4″ and connect all sinnets with a row of alternating square knots.
Step 7: Drop down 3 1/2″ and tie 2 rows of alternating square knots. Use the 2 longest cords to tie 1 square knot over all cords. (Note: I ended mine with a wrap knot since I had extra cord. If you purchased just 50 yards, you won’t.)
Step 8: Add one smaller bead to each cord end. Tie an overhand knot in each cord and trim all cords just below the overhand knot.
Finish off: Burn cord ends slightly to keep cord from fraying. Hold fire to cord a nanosecond to melt cord, not scorch it.
Enjoy!!
If you would like a longer macrame plant hanger with more detail, go here for the pattern. Thanks!!
http://www.etsy.com/listing/69800943/pattern-for-macrame-plant-hanger
This Year's Dozen 
thank you, thank you 🙂 very interesting for someone who has never done much macrame before!
Great! Great! Great!
I have done macrame before but had forgotten the knots. This is amazingly detailed and I am very grateful for the information. I search craft stores for an instructional guide with no success. Thanks for helping to bring back a lost craft!!!
Thank you for these directions. I have a 5″ pot with a spider plant in it which I want to hang in my kitchen. I only want the plant hanger to be 24″ long. At which point could I shorten this pattern? And if I wanted to attach the lower ends to a disk of stained wood instead of having tails, how would I do that?
Thank you again so very much!
You could tie half of the knots. I would adjust portions of all of it, each section. I am not sure what your stained wood disk looks like so won’t be able to advise you on how to attach it.
Thx I’ve been looking for this particular pattern
split your tails into 3 or 4 groups, drill out the disk to an appropriate size, take the groups of cords through the holes, put beads on the groups of cords and then tie off as you desire
This is an excellent tutorial. I was wondering, at what point should I alter the length/knots to accommodate a larger or smaller pot? I’m making two for some spider plants we just received as a gift, and I know the pots are larger than 9 in diameter. Any tips?
Hi Cate. Actually you can alter this plant hanger at any point. Do half the knots. Omit some sections. Experiment with the knots. The main thing is to have enough cord left to make a cradle to fit the pot. And you want the pot to be secure and not fall out. For larger pots, I start off with longer cord lengths. Hope this helps. Thanks!!
Thank you so much for posting these instructions! I have been looking all over for instructions and yours are every clear. I have a question though, where did you purchase your supplies?
Hi there. I have beads from years ago. The 80’s and 90’s. Lately, I have been buying my macrame supplies from Munro Crafts and King Kountry. I have links to them on my sidebar.
Good luck with your plant hanger. Let me know if you have any questions.
Hello,
I live in Toronto,Canada.Do you know where I could buy Macrame Supplies’
THANKYOU!
Hi,my name is Donna price , I have a question, first off I am a very new to macrama this is my first time ever doing this, I have read your instructions, step by step , I’ve got as far as the completion of the ring, except when I tied off how do you keep it from Twisted up on you.
I am very excited to macrame my own plant hanger, but live in Ottawa, Canada and cannot seem to find any cord/materials. Any suggestions on where I might find some supplies?
Many thanks,
Darlene
Not sure if I sent this correctly the first time
http://hosted.where2getit.com/michaels/
Hi darlene there is a group in Canada called the international guild of knot tyers the guy is John Staley email is southern.ontario.knotyers@gmail.com if you get intouch with him he should be able to help as they use rope all the time.
Hope this is some help to you
Tank you so much for your macrame patterns.
Svetlana
I just want to start on macrame and you explenation are very good and very helpful . I will have a go . thank you for cherying Marie.
Thanks so much for sharing these directions. I did this years ago and just couldn’t get started right. Your step-by-step is perfect. I cannot wait to get started again. 🙂
Hi Rhoda. So glad I could help. I hope you will show me your completed plant hanger.
Hi, I like the way you share the way to learn how to do Macrame. My aunt use to do Macrame a long time ago. Now she is looking to start again and she find hard to find the supplies in store, Specially the cords. Do you know if this supplies can be find in stores or she only can buy then online?
Thank you
Glory
Hi Glory, yep, it is probably going to be hard to find macrame cord in local stores. Few carry it any longer. I am lucky to have a store in my area that still carries it. Only other places, for me too, are on-line. Good luck in finding the cord and happy macraming.
Hi! Can you give me other designs and patterns? Cause I ave a project to do
[…] If youd like to make your own heres 2 sites: How to Make a Hanging Plant Holder | Garden Guides How to Macrame a Plant Hanger This Year's Dozen __________________ ~Birds are like chips, you just can't have one!~ My flock: 2 budgies To […]
Hello –
Great instructions for a beautiful plant hanger, thank you for sharing.
What size beads are needed to fit four strands of the 6mm cord?
Thank you in advance.
Hi Micheline. Thank you!!
Mostly, I use 30mm Marbella round, hard plastic beads. The hole is large enough for 4 strands of 6mm cord.
Are you making plant hangers? I love making them.
Hello –
Thank you for the information on the size beads.
This will be my first plant hanger in many, many years. We’ll see how this goes! If no hitch, I’ll make more.
Hello,
While I was on a vacation in El Salvador i had seen a macrame hanger for the kitchen to put fruit/ veggies in.
I did not buy one but wished that I would have. I plan to make one but was hoping for some assistance.
Do you have a pattern for such a thing?
Thanks for your help!
Cheryl
Hi Cheryl, did the basket part of this have one container for fruit/veggies? Or multiple parts? What did the bottom look like, do you remember? I may have something similar in one of my macrame books. Will let you know.
Đẹp quá …
Hi Donna, this is spectacular, and exactly what I have been looking for. I didn’t notice but is there a print icon somewhere to print this out?
v
Hi Vikki. I guess just go to File/Print from your browser. Let me know if you aren’t able to print it. Would love to see what you make. Thanks!!
Good to know that I am not the only one having a hard time finding macrame cord. I did get lucky and found a beautiful roll of 118 6mm cord and bought it. I fould it at Hobby Lobby, in Georgetown, TX, but no luck at any of the Hobby Lobby stores. Some years ago, I got in touch with Mary Maxim. I receive their books from time to time, and alas, they had many cr
Quite a few years ago, I called the crafts store named Mary Maxim, which carries many different crafts and supplies, but not the macrame cord or beads. However, they did give me a phone number to call and I was able to order cord from that place. I don’t know the number now,but Mary Maxim may still have it. I did not have access to the internet at that time, but I would guess they are available online now. You can try Mary Maxim.com, maybe it will work, and if they have a comment page, you can ask them where to purchase this long lost item. Just so you know, I have not found any Hobby Lobby store that carries cord or beads, but I am seeing several places as I surf the net. Good luck, Mary Ellen
I would like to buy some of the woll or string that is in the pictures please let me know the price and whare I can get some thanking you Clare
Hi Clare, thanks!! I can put some macrame cord in my Etsy store. Are you in the USA?
I learned to macrame as a child in Vacation Bible School and haven’t done it in over 30 years but your step by step instructions brought it back to me so fast. Thanks for such great info.
Hi, thanks for the instructions for this great plant hanger!
One question before I start. The instructions say to cut 6-foot cords, which are folded in half. The finished length of the plant hanger is 4 1/2 feet.
When folding the cords in half, don’t you get 3 feet of cord to work with? And then isn’t some of that length taken up by knots? Wouldn’t that give you a plant hanger much shorter than 4 1/2 feet?
Is this a typo, or is there something I don’t understand?
Actually, you cut eight 6 YARD cords.
Hope this helps.
Yes!
Thank you, my error! (blushes)
Great directions Donna!! I have been macramé-ing for many years – but have never made a plant hanger. We’ll see how my Christmas presents turn out 😉
I have typically found it difficult to find supplies in stores – so I most often buy online (and you can find more bulk/wholesale supplies for less expensive than in a store). I just stumbled across the following website:
http://www.macramesuperstore.com
100 yd skein of 6mm braided cording is $7.59 – and they have TONS of colors.
A quick google search for “macrame cording” will turn up a lot of results.
[…] How to Macrame a Plant Hanger (via This Year’s Dozen) Amazing macrame pattern! Thanks to Donna! FINISHED LENGTH: approx 4 1/2 ft, from top of ring to bottom tail. Will hold up to a 9″ diameter basket, container or bowl. MATERIALS USED: 50 yards gray 6mm braided macrame cord 1 – 2″ welded ring (treated, not raw metal) 4 large hole gray marbella beads 16 smaller gray marbella beads for tail cords DIRECTIONS Step 1: Cut 8 cords 6 yards each and 2 cords 1 yard each. Step 2: Use a 1 yard cord to completely cover the 2″ welded ring with continu … Read More […]
For those looking for macrame cord in the East Texas area, I found it at the Hobby Lobby in Tyler, TX. They had maybe 6 colors. Not a huge selection but they had the color I was looking for. I am going to make a plant hanger for my bathroom. I haven’t done macrame in many, many years. It should be like riding a bicylce though….never forget but may be rusty when restarting it! LOL
Wonderful!! I had made macrame plant hangers many years ago but had forgotten the knots, lengths to cut, etc. This was perfect! I thank you and my spider plants thank you.
Thank you so much for taking time out to teach others. You made it so easy I whipped one out in one sitting!
Hi everyone who recently commented… I haven’t been here for a while but wanted to thank you for your comments. Thank you very much.
Hi Donna!
Just checking in to submit my third entry for the giveaway. I am interested in the Macrame grab bag.
Thanks much, and have a super day!
We are getting pounded with rain here.
I have never attempted macrame, my mother was a macrame wiz, they were everywhere. There aren’t any left now, destroyed by weather and time I suppose. After reading your blog I think I will give it a go. Do you think in a pinch twine would work in place of the traditional cord?
Michelle – Any cording will work for macrame – it just depends on how you want your final product to look. Most of the macrame work that I do is with hemp twine – some polished (smooth and more consistent), some unpolished (rougher and more fibrous).
Thanks, Laurie, for answering Michele’s question. I mainly work with polypropylene (the regular macrame cord) and have worked with jute only once.
On April 14, 2011 at 9:42 pm khadija abdul bari said:
Hello, I live in Toronto,Canada.Do you know where I could buy Macrame Supplies. THANK YOU!
Hi there. I have a list of macrame suppliers that I use posted in the sidebar on my blog. On the right side. I am sure they will ship to Canada. Hope this helps.
Great instructions- I can’t wait to try this. We are making custom hanging basket arrangements for my wedding and I know these basket holders will look great. Thanks so much for posting this!
[…] How to Macrame a Plant Hanger В« This Year's Dozen May 27, 2009 … Great instructions for a beautiful plant hanger, thank you for sharing. What size beads are needed … […]
[…] They make really nice little gifts for friends who like plants, and even better gifts for friends who like hanging plants. Yes! Interested in making a more complicated pot plant hanger, here’s a fancy pants pot plant macrame DIY! […]
I used cotton twine (that I dyed different colors) to macrame over plain wire plant hangers. These are strong and secure. I continued past the point where the wires attached to the rim of the pot to gather the colorful ends under the pot, providing the illusion that the string actually supported the pot. My rope plant hung 4 feet from a simple 6 inch pot, and was the centerpiece in my bow window. That was many years ago. I now see that the cotton string I used is available at Ace Hardware, sold as Parcel Post Twine. Visit Amazon.com and search twine to find this cotton twine, or more heavy duty (indoor/outdoor) twisted nylon mason line, with 210 lb. tensile strength. Happy knotting!
That’s a great idea!! Thanks for posting it.
When making the squate knot sennit we inadevertantly used the core cords for making the second square knot and continued in this fashion making the next square knot with the core cords of the previous, is there a name for this or did we just happen to create a new pattern
Hi there, that is one of the cross-over knots. It does have an official name but I can’t remember it right now. Glad to see people macraming again.
Darlene; I would try Michaels, they are located throughout Canada and have a grerat supply of craft items.
http://hosted.where2getit.com/michaels/
Thanks, Jim!!
I was just going to post where I shop here in the USA. But your information is even better. It’s local.
Thank you for the pattern!!!
Greetings from Australia
This is for Donna Mae, I have a friend that would love one of your macrame’ tables. Do you sell them? Betty
Hi Betty, those macrame tables sure are pretty, aren’t they!! But sadly these OLD hands wouldn’t be able to make up anything as elaborate as them any longer. Years ago, back in the 80’s and 90’s, I macramed quite a few of them. Thanks for the question.
BTW, I make up plant hangers and sell those. Mostly ones made from my Carousel Buttons pattern. Those I had for sale sold but I plan to make more. Soon. Check out my Etsy store.
[…] choose. For a more pared back look, use succulent plants, plain pots and a simple macrame pattern CLICK HERE for a great tutorial on hanging macrame […]
I used to make macrame plant hangers for myself years ago. Now I have decided I would like to make some more but cannot find anywhere to buy the cord, it seems that the only macrame work done now is bracelets with 1, or at the most 2 mm cord. I cannot find a supplier in Australia (or anywhere for that matter) who will supply the heavier cord necessary for plant hangers.
Jacqueline try http://www.ropegalore.com.au/
Thanks, Clair!!
i have only 1 word AMAZING ……………………..
thanks so much to share yout work so generously. i realy appreciate 🙂 i love the use you do of creativity
Just used this to make my first ever macrame plant holder- exciting!! Thank you so much for these amazing instruction!!! 🙂
Great!! Thanks for letting me know.
[…] This online tutorial taught me the Larkshead (or half-hitch) knot, the Wrap Knot, the Crown Knot, and some Square Knot variations, and after practicing those a bit, I had all the tools I needed for all manner of knotting. […]
[…] Remember these beauties? Get instructions on making a macrame plant hanger from This Year’s Dozen. […]
I have a question; I have an alcupulco chair frame. In case you don’t know what I am talking about, it is kind of round or egg shaped ring with a much smaller ring at the bottom or seat. I would like to macrame a seat using the alternating square knot method. However my question is, how do I eliminate cords as I go as there will be way too many cords to put on the smaller ring.
What a cool chair!! Had never seen one before. I would start at the bottom and work my way to the top. And using only two cords allowing the metal spokes to be the “center” cord. It is easy to add cords going up, if necessary. That way you won’t have a million cords at the bottom hole to tie off. It could be done though. Single half hitch to the bottom ring instead of double. Glue the end cords before cutting off. Several ways to do this. Good luck. Going to be pretty.
For plant hangers & similar projects – I order the Bonnie Braid 6mm cording from here: http://www.macramesuperstore.com/
It’s fusible – so you would be able to eliminate a cord, or add in a cord, just by melting the end & smooshing it to another cord.
Thanks, Laurie.
Hi there everyone, it’s my first visit at this website, and article is genuinely fruitful in favor of me, keep up posting these types of articles.
[…] If you want to do a similar plant hanger I found a very good DIY over at another blog. […]
Hi everyone I’m from Georgia and for the past two days I’ve been trying to find a book that shows you all the basic knots, what kind of twine to use and how to get it as long or short as i want it to be (etc). I’ve been online, to all the local Libraries, and Thrift stores with no luck, With that being said my question is would your book give me all the info I’m looking for? I have lots of house plants and would love to hang some with my own creations. Right now I’m learning to put holes in different kinds of glass pot in the colors and shapes I like. Any all suggestions would be appreciated.
I haven’t done macrame in years, but have just gotten interested in a pot hanger for a friend. Most of the plans I found on the internet do NOT take into account where the pages end. The result is pictures cut in half, etc. You are the first one that I’ve run across that has really put a lot of time into figuring out how the directions will print out. Thank you thank you.
Hi there! I simply wish to give a huge thumbs up for the
good data you have right here on this post. I can be coming back to your weblog for extra soon.
[…] https://thisyearsdozen.wordpress.com/2009/05/27/how-to-macrame-a-plant-hanger/ […]
all i want is to buy a book with different macramae hanging patterns i would even buy 2 0r 3 they seem to be no where i know i can print them but i would rather have the book can u help me to where to get them misspetunia33 @yahoo.com
am in dire need for a macramae hanging pattern please
I am looking for stores within toronto which carry macrame supplies, possibly also groups/classes I can attend. Am relatively new to the city and would greatly apprechiate any information. Thanks in advance.
I cannot find the 30mm hole beads anywhere. Does anyone know where I could find these online to order? I don’t care if they are wooden, plastic or glass. Thank you.
This is really interesting, You’re a very skilled blogger.
I’ve joined your feed and look forward to seeking more of your wonderful post.
Also, I have shared your site in my social networks!
I’m more than happy to find this website. I wanted to thank you for ones time due to this fantastic read!!
I definitely loved every bit of it and I have you bookmarked to see new stuff
on your blog.
Can you give me some other designs and patterns? Cause I have a project to do.
THANK YOU!
Thank you also for the directions! Thank you very much.
Hi, I’ve tried Macrame a couple of times and I’ve failed miserably as I end up with lengths shorter then the other lengths once I’ve done the twist knots etc… How can I avoid this. I would love to know what I’m doing wrong. Yours looks incredible!!! Thanks Cate
Where do you buy macrame cording 6mm and multi color
So if I wanted to do a hanger for a 12″ planter, should I just do 12″ of square knots at the beginning? Is that what determines the base size?
So very cool to find your tutorial. I’ve wanted to resurrect this age old method of plant display for a while now. I just couldn’t remember how to measure the cords… nor any patterns to use. I used to do a good bit of macrame’ back in the day…. I’m hoping once I start, the knots will just come rushing back to mind!
Thank you so much!
[…] Macrame a Plant Hanger (via This Year’s Dozen) […]
I want to make a plant hanger
Great pattern thank you. I adjusted mine for a regular pot of flowers at the bottom.
Thank you for the tutorial! I’m confused with one of the sections though. Towards the end when you say to use the 2 longest chords to tie square knots around all the other chords, what do you mean? Use two chords to tie a knot around the other 14 in the center? It’s not completely clear what to do at this step from the picture.
Yeah I’m lost there too! I know this post is from 9 years ago but if anyone can answer this it would be really helpful.
I don’t see that in these instructions anywhere. Can you reference a step number or something? I’ll try to help.
Hi terrapinie, sorry I’m replying to my own comment but there’s no reply button under your comment.
It’s in Step 7 after the 2 rows of alternating square knots, it says: “Use the 2 longest cords to tie 1 square knot over all cords.” Basically it’s the knot that the pot sits on, before the wrap knot. Thanks in advance 🙂
I am always looking for different patterns for macreme plant hangers.
[…] How to Macrame a Plant Hanger « This Year’s Dozen – May 27, 2009 · Hi Cate. Actually you can alter this plant hanger at any point. Do half the knots. Omit some sections. Experiment with the knots. The main thing is to have … […]
No passo 3 recomenda-se passar 6 cordas pelo anel. Não seriam 8 cordas?
[…] –https://thisyearsdozen.wordpress.com/2009/05/27/how-to-macrame-a-plant-hanger/ […]
BEST DIRECTIONS EVER! Love measuring the lengths of knots!
Hey! I’m in the process of making this planter- first macrame ever- and it’s going well so far. I do love your instructions and especially the pictures and links to more instructions. You are awesome! I did have one question so far. After the crown knots you say to make 9” of square knots (sennit, I guess). If I just make plain square knots sequentially, don’t I end up with a lot of extra core cord? Since I’m always using the two outside cords for the knots? Hope the questions not too silly. Also, I noticed a lot of inquiries about where to get rope cord twine etc for this. I know Michaels has cord due to a recent trend that my kids got into of making braided or knotted bracelets and it seems to be the same thing. I actually recommend trying a hardware store. I went to Home Depot and just bought a couple rolls of jute twine (cheap!) and plain cotton twine because that’s just the look I wanted. BUT, they had a pretty impressive selection of synthetic cords in different colors and gauges, so it’s definitely worth trying there. Thanks again for the great plan!
เพิ่ม Like, เพิ่มไลค์แฟนเพจ ราคาถูก, รับจ้างปั้มไลค์, รับสร้างแฟนเพจพร้อมยอดไลค์, ปั้มไลค์, บริการปั้มไลค์ฟรี, รับเพิ่ม Like Fanpage Facebook ราคาพิเศษ เหมาะสำหรับผู้ที่ต้องการเพิ่ม Like Fanpage ให้ดูเป็นความน่าเชื่อถือของร้าน, เพิ่มไลค์แฟนเพจ, Add Like Fanpage, ปั้มไลค์รูปเฟส, กดไลค์รูป, ปั้มไลค์ทั่วไป, ปั้มไลค์รูป, ปั้มไลค์ฟรี, จ้างไลค์รูป, ไลค์แฟนเพจราคาถูก, รับจ้างกดไลค์, ปั้มไลค์เพจคนไทย, ปั้มไลค์ Facebook, เพิ่มไลค์, จ้างไลค์, ปั้ม Like ฟรี, ปั้มยอดไลค์เป็นคนไทย 100%, รับปั้มไลค์รูป, โกงไลค์, รับทำเพจเฟสบุ๊ค, ปั้มไลค์มือถือ, ปั้มรูป, รับเพิ่มไลค์แฟนเพจ เป็นการโปรโมทแฟนเพจ เพื่อเพิ่มยอดขายสินค้าได้, ปั้มโพสต์, เพิ่มไลค์ฟรี, การเพิ่ม Like เป็นการเพิ่มโอกาสทางการขายสินค้าของคุณนั่นเอง ด้วยงานบริการเพิ่มไลค์แฟนเพจระดับมืออาชีพ ประสบการณ์การทำงานหลายปี, บริการเพิ่มไลค์แฟนเพจฟรี, ปั้มไลค์แฟนเพจ, ปั้มไลค์ราคาถูก, ปั้มไลค์เฟสบุ๊ค, ปั้มไลค์เพจฟรี, รับปั้มไลค์เพจ, ปั้มไลค์ง่ายๆ, รับไลค์ครบวงจรทั่วไทย, ปั้มเพจ, ปั้มไลค์รูป Facebook, กด Like, บริการเพิ่มไลค์เฟสบุ๊คให้แฟนเพจ, จ้างกดไลค์, เพิ่มไลค์เพจ ราคาถูก, บริการเพิ่ม Like ให้แฟนเพจของคุณ โดยทีมงานระดับมืออาชีพ ในระยะเวลาอันสั้นและราคาถูก รับประกันไลค์จากคนไทย 100%, ปั้มเพจ เหมาะสำหรับผู้ที่ต้องการยอดไลค์เพจเพจเยอะๆ, Pump Like, รับเพิ่มไลค์แฟนเพจเฟสบุ๊ค, Like Fanpage, แฟนเพจพร้อมยอดไลค์, ปั้มเพจเฟสบุ๊ค, ไลค์แฟนเพจเฟสบุ๊ค, จ้างปั้มไลค์, ไลค์แฟนเพจได้สูงสุดหนึ่งล้านไลค์, ปั้มไลค์เพจ Facebook, ปั่นไลค์, ไลค์แฟนเพจ, รับทำไลค์แฟนเพจจำนวนมาก, ปั้มไลค์เพจ, รับ Like Fanpage, กดไลค์, รับเพิ่มไลค์, รับทำเพจสินค้าพร้อมยอดไลค์, ไลค์เพจ, รับทำไลค์ครบวงจร, ปั้มไลค์สถานะ, Auto Like, ซื้อไลค์แฟนเพจ, บริการปั้มไลค์แฟนเพจฟรี, รับจ้างเพิ่มไลค์, ปั้มไลค์ครบวงจร, จ้างเพิ่มไลค์, เพิ่มไลค์คนไทย, ปั้มไลค์ ในโทรศัพท์, เพิ่มไลค์เพจ, รับไลค์แฟนเพจ, กดไลค์แฟนเพจ, ไลค์คนไทย 100%, Up Like Fanpage
[…] Free Printable Macrame Plant Hanger Patterns […]
[…] the macrame rope off Amazon.ca and I got the pattern right here on WordPress, from this wonderful blogger. The wooden beads came from the local […]
[…] Rather than use pot plants what about using hanging baskets. Are you feeling crafty? Macramé pot plant hangers are back in fashion. Try making your own macrame plant hanger. […]
[…] –https://thisyearsdozen.wordpress.com/2009/05/27/how-to-macrame-a-plant-hanger/ […]
thats clever post petzneeds.com
Don Mae, your pictures are no longer available so it’s difficult to follow along on your Macrame instructions.